Efika MX boot

<pre>

 U-Boot 2009.01.2.0.6-efikasb (Nov 02 2010 - 09:58:13)

CPU:   Freescale i.MX51 family 3.0V at 800 MHz

mx51 pll1: 800MHz

mx51 pll2: 665MHz

mx51 pll3: 216MHz

ipg clock     : 66500000Hz

ipg per clock : 665000000Hz

uart clock    : 66500000Hz

cspi clock    : 54000000Hz

Board: Efika MX Smartbook [POR]

PMIC ID: 0x000045d0 [Rev: 2.0a]

DRAM:  512 MB

JEDEC ID: 0xbf:0x25:0x4a

Reading SPI NOR flash 0x40000 [0x1000 bytes] -> ram 0xafd006e8

SUCCESS

In:    serial

Out:   serial

Err:   serial

Boot Source: SPI NOR FLASH BOOT

Hit any key to stop autoboot:  0

JEDEC ID: 0xbf:0x25:0x4a

4096 KiB SST25VF032B - 4MB at 0:1 is now current device

Reading SPI NOR flash 0x100000 [0x50000 bytes] -> ram 0x97800000

.SUCCESS

## Starting application at 0x97800000 ...

                                         �

U-Boot 2012.04.01-g7862ffd-dirty (Aug 16 2012 - 16:53:57)

CPU:   Freescale i.MX51 rev3.0 at 800 MHz

Reset cause: POR

Board: Efika MX, rev1.3

DRAM:  512 MiB

WARNING: Caches not enabled

MMC:   FSL_SDHC: 0

SF: Detected SST25VF032B with page size 4 KiB, total 4 MiB

In:    serial

Out:   serial

Err:   serial

Net:   CPU Net Initialization Failed

No ethernet found.

Efika> run bsd

(Re)start USB...

USB:   Register 10011 NbrPorts 1

USB EHCI 1.00

scanning bus for devices... 4 USB Device(s) found

       scanning bus for storage devices... 1 Storage Device(s) found

       scanning bus for ethernet devices... 1 Ethernet Device(s) found

Waiting for Ethernet connection... done.

Using asx0 device

TFTP from server 192.168.10.90; our IP address is 192.168.10.87

Filename 'efika_mx/kernel.uboot'.

Load address: 0x91000000

Loading: T #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #######################################

done

Bytes transferred = 5337304 (5170d8 hex)

## Booting kernel from Legacy Image at 91000000 ...

   Image Name:   FreeBSD kernel

   Created:      2012-11-13  15:39:05 UTC

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    5337240 Bytes = 5.1 MiB

   Load Address: 90100000

   Entry Point:  90100100

   Verifying Checksum ... OK

   Loading Kernel Image ... OK

OK

Starting kernel ...

KDB: debugger backends: ddb

KDB: current backend: ddb

Copyright (c) 1992-2012 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

        The Regents of the University of California. All rights reserved.

FreeBSD is a registered trademark of The FreeBSD Foundation.

FreeBSD 10.0-CURRENT #229 r242977:242979: Tue Nov 13 17:38:46 EET 2012

    ray@terran.dlink.ua:/usr/obj/arm.armv6/usr/home/ray/work/FreeBSD/Projects/Efika_MX/src/efika_mx/sys/EFIKA_MX arm

Preloaded elf kernel "kernel" at 0xc05342d0.

CPU: Cortex A8-r2 rev 5 (Cortex-A core)

 Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext

 WB disabled EABT branch prediction enabled

LoUU:2 LoC:2 LoUIS:1

Cache level 1:

 32KB/64B 4-way data cache WT WB Read-Alloc

 32KB/64B 4-way instruction cache Read-Alloc

Cache level 2:

 256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc

real memory  = 536870912 (512 MB)

Physical memory chunk(s):

0x90000000 - 0x900fffff, 1048576 bytes (256 pages)

0x905eb000 - 0xaf629fff, 520351744 bytes (127039 pages)

avail memory = 519168000 (495 MB)

random device not loaded; using insecure entropy

wlan: <802.11 Link Layer>

null: <null device, zero device>

openfirm: <Open Firmware control device>

random: <entropy source, Software, Yarrow>

mem: <memory>

nfslock: pseudo-device

fdtbus0: <FDT main bus>

simplebus0: <Flattened device tree simple bus> on fdtbus0

tzic0: <TrustZone Interrupt Controller> mem 0xcffc7000-0xcffcafff on simplebus0

simplebus1: <Flattened device tree simple bus> on fdtbus0

simplebus2: <Flattened device tree simple bus> on simplebus1

imxccm0: <Freescale Clock Control Module> mem 0xe3fd4000-0xe3fd7fff,0xcffcb000-0xcffcefff,0xcffcf000-0xcffd2fff,0xcffd3000-0xcffd6fff irq 71,72 on simplebus2

imxccm0: PLL1=800MHz, PLL2=665MHz, PLL3=216MHz

imxccm0: CPU clock=800000000, UART clock=66500000

imxccm0: mainbus clock=665000000, ahb clock=133000000 ipg clock=66500000 perclk=2000000

simplebus3: <Flattened device tree simple bus> on simplebus2

ehci0: <Freescale integrated USB controller> mem 0xe3f80000-0xe3f83fff irq 14,16,17,18 on simplebus2

ehci0: [GIANT-LOCKED]

usbus0: EHCI version 1.0

usbus0 on ehci0

ehci0: usbpf: Attached

imx_gpt0: <Freescale i.MXxxx GPT timer> mem 0xe3fa0000-0xe3fa3fff irq 39 on simplebus2

imx_gpt0: Run on 66500KHz clock.

Event timer "i.MXxxx GPT Eventtimer" frequency 66500000 Hz quality 1000

Timecounter "i.MX GPT Timecouter" frequency 66500000 Hz quality 1000

clock: hz=100 stathz = 0

imx_gpt0: timer clock frequency 66500000

uart0: <imx_uart> mem 0xe3fbc000-0xe3fbffff irq 31 on simplebus2

uart0: fast interrupt

uart0: console (115200,n,8,1)

simplebus4: <Flattened device tree simple bus> on simplebus1

atapci0: <Freescale Integrated PATA Controller> mem 0xcffef000-0xcfff2fff irq 70 on simplebus4

ata2: <ATA channel> at channel 0 on atapci0

imx_gpt0: switch DELAY to use H/W counter

Timecounters tick every 10.000 msec

lo0: bpf attached

usbus0: 480Mbps High Speed USB v2.0

ata2: reset tp1 mask=01 ostat0=d0 ostat1=00

ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00

ata2: reset tp2 stat0=50 stat1=00 devices=0x1

ugen0.1: <Freescale> at usbus0

uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0

ada0 at ata2 bus 0 scbus0 target 0 lun 0

ada0: <SanDisk pSSD-P2 8GB SSD 5.20> ATA-8 device

ada0: Serial Number CFZ071510001526

ada0: 16.700MB/s transfers (PIO4, PIO 512bytes)

ada0: 7641MB (15649200 512 byte sectors: 16H 63S/T 15525C)

ada0: Previously was known as ad4

pass0 at ata2 bus 0 scbus0 target 0 lun 0

pass0: <SanDisk pSSD-P2 8GB SSD 5.20> ATA-8 device

pass0: Serial Number CFZ071510001526

pass0: 16.700MB/s transfers (PIO4, PIO 512bytes)

GEOM: new disk ada0

Root mount waiting for: usbus0

uhub0: 1 port with 1 removable, self powered

Root mount waiting for: usbus0

ugen0.2: <vendor 0x1a40> at usbus0

uhub1: <vendor 0x1a40 USB 2.0 Hub MTT, class 9/0, rev 2.00/1.00, addr 2> on usbus0

uhub1: MTT enabled

Root mount waiting for: usbus0

uhub1: 4 ports with 4 removable, self powered

Root mount waiting for: usbus0

ugen0.3: <Kingston> at usbus0

umass0: <Kingston DT 101 II, class 0/0, rev 2.00/1.10, addr 3> on usbus0

umass0:1:0:-1: Attached to scbus1

(probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?

pass1 at umass-sim0 bus 0 scbus1 target 0 lun 0

pass1: <Kingston DT 101 II PMAP> Removable Direct Access SCSI-0 device

pass1: Serial Number 0019E00149F7B9B1E000010C

pass1: 40.000MB/s transfers

da0 at umass-sim0 bus 0 scbus1 target 0 lun 0

da0: <Kingston DT 101 II PMAP> Removable Direct Access SCSI-0 device

da0: Serial Number 0019E00149F7B9B1E000010C

da0: 40.000MB/s transfers

da0: 3827MB (7837696 512 byte sectors: 255H 63S/T 487C)

GEOM: new disk da0

Root mount waiting for: usbus0

ugen0.4: <vendor 0x2001> at usbus0

axe0: <vendor 0x2001 product 0x3c05, rev 2.00/0.01, addr 4> on usbus0

axe0: PHYADDR 0xe0:0x03

Loader variables:

Manual root filesystem specification:

  <fstype>:<device> [options]

      Mount <device> using filesystem <fstype>

      and with the specified (optional) option list.

    eg. ufs:/dev/da0s1a

        zfs:tank

        cd9660:/dev/acd0 ro

          (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)

  ?               List valid disk boot devices

  .               Yield 1 second (for background tasks)

  <empty line>    Abort manual input

mountroot> ufs:/dev/da0s1a ro

Trying to mount root from ufs:/dev/da0s1a [ro]...

warning: no time-of-day clock registered, system time will not be set accurately

start_init: trying /sbin/init

miibus0: <MII bus> on axe0

rlphy0: <IP101 10/100 PHY> PHY 3 on miibus0

rlphy0: OUI 0x0009c3, model 0x0005, rev. 4

rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

ue0: <USB Ethernet> on axe0

ue0: bpf attached

ue0: Ethernet address: 00:80:c8:3b:cf:91

Setting hostuuid: 0d74d9c5-da2f-11e1-b9b6-8a3af74f1c98.

Setting hostid: 0x1a7a9414.

No suitable dump device was found.

Entropy harvesting: interrupts ethernet point_to_pointsha256: /kernel: No such file or directory

 kickstart.

Starting file system checks:

/dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS

/dev/da0s1a: clean, 1456070 free (2750 frags, 181665 blocks, 0.1% fragmentation)

Mounting local file systems:.

Writing entropy file:.

Setting hostname: efikamx.

ue0: link state changed to DOWN

Starting Network: lo0 ue0.

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384

        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>

        inet 127.0.0.1 netmask 0xff000000

ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

        options=80008<VLAN_MTU,LINKSTATE>

        ether 00:80:c8:3b:cf:91

        inet 192.168.10.87 netmask 0xffffff00 broadcast 192.168.10.255

        media: Ethernet autoselect (none)

        status: no carrier

Starting devd.

ue0: link state changed to UP

Generating host.conf.

eval: cannot create /etc/host.conf: Read-only file system

eval: cannot create /etc/host.conf: Read-only file system

eval: cannot create /etc/host.conf: Read-only file system

Creating and/or trimming log files.

Starting syslogd.

realpath: /dev/dumpdev: No such file or directory

/etc/rc: WARNING: Dump device does not exist.  Savecore not run.

ELF ldconfig path: /lib /usr/lib /usr/lib/compat

Clearing /tmp (X related).

Updating motd: /etc/motd is not writable, update failed.

Starting cron.

Starting inetd.

Starting background file system checks in 60 seconds.

Tue Nov 13 09:11:33 UTC 2012

FreeBSD/arm (efikamx) (ttyu0)

login: root

Nov 13 09:11:35 efikamx login: ROOT LOGIN (root) ON ttyu0

FreeBSD ?.?.?  (UNKNOWN)

Welcome to FreeBSD!

Before seeking technical support, please use the following resources:

o  Security advisories and updated errata information for all releases are

   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section

   for your release first as it's updated frequently.

o  The Handbook and FAQ documents are at http://www.FreeBSD.org/ and,

   along with the mailing lists, can be searched by going to

   http://www.FreeBSD.org/search/.  If the doc package has been installed

   (or fetched via pkg install lang-freebsd-doc, where lang is the

   2-letter language code, e.g. en), they are also available formatted

   in /usr/local/share/doc/freebsd.

If you still have a question or problem, please take the output of

`uname -a', along with any relevant error messages, and email it

as a question to the questions@FreeBSD.org mailing list.  If you are

unfamiliar with FreeBSD's directory layout, please refer to the hier(7)

manual page.  If you are not familiar with manual pages, type `man man'.

Edit /etc/motd to change this login announcement.

root@efikamx:~ # ps -ax

PID TT  STAT    TIME COMMAND

  0  -  DLs  0:00.00 [kernel]

  1  -  SLs  0:02.82 /sbin/init --

  2  -  DL   0:00.00 [xpt_thrd]

  3  -  DL   0:00.00 [pagedaemon]

  4  -  DL   0:00.00 [vmdaemon]

  5  -  DL   0:00.00 [pagezero]

  6  -  DL   0:00.00 [bufdaemon]

  7  -  DL   0:00.00 [syncer]

  8  -  DL   0:00.00 [vnlru]

  9  -  DL   0:00.00 [softdepflush]

 10  -  RL   0:16.45 [idle]

 11  -  WL   0:00.23 [intr]

 12  -  DL   0:00.13 [geom]

 13  -  DL   0:00.00 [yarrow]

 14  -  DL   0:00.34 [usb]

 15  -  DL   0:00.00 [schedcpu]

276  -  Ss   0:00.00 /sbin/devd

354  -  Ss   0:00.04 /usr/sbin/syslogd -s

449  -  Ss   0:00.03 /usr/sbin/cron -s

465  -  Ss   0:00.00 /usr/sbin/inetd -wW -C 60

481 u0- S    0:00.00 sh /etc/rc autoboot

482 u0- S    0:00.01 logger -p daemon.notice -t fsck

484 u0- S    0:00.00 sleep 60

485 u0  Ss   0:00.06 login [pam] (login)

486 u0  R    0:00.08 -csh (csh)

488 u0  R+   0:00.01 ps -ax

root@efikamx:~ # ifconfig

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384

        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>

        inet 127.0.0.1 netmask 0xff000000

ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

        options=80008<VLAN_MTU,LINKSTATE>

        ether 00:80:c8:3b:cf:91

        inet 192.168.10.87 netmask 0xffffff00 broadcast 192.168.10.255

        media: Ethernet autoselect (100baseTX <full-duplex>)

        status: active

root@efikamx:~ # uname -a

FreeBSD efikamx 10.0-CURRENT FreeBSD 10.0-CURRENT #229 r242977:242979: Tue Nov 13 17:38:46 EET 2012     ray@terran.dlink.ua:/usr/obj/arm.armv6/usr/home/ray/work/FreeBSD/Projects/Efika_MX/src/efika_mx/sys/EFIKA_MX  arm

root@efikamx:~ # KDB: enter: Break to debugger

[ thread pid 10 tid 100002 ]

Stopped at      kdb_enter+0x48: ldrb    r15, [r15, r15, ror r15]!

db> c

root@efikamx:~ # reboot

Nov 13 09:11:52 efikamx reboot: rebooted by root

Nov 13 09:11:52 efikamx syslogd: exiting on signal 15

Waiting (max 60 seconds) for system process `vnlru' to stop...done

Waiting (max 60 seconds) for system process `bufdaemon' to stop...done

Waiting (max 60 seconds) for system process `syncer' to stop...

Syncing disks, vnodes remaining...0 0 done

All buffers synced.

Uptime: 47s

Rebooting...

�eset ...

U-Boot 2009.01.2.0.6-efikasb (Nov 02 2010 - 09:58:13)

CPU:   Freescale i.MX51 family 3.0V at 800 MHz

mx51 pll1: 800MHz

mx51 pll2: 665MHz

mx51 pll3: 216MHz

ipg clock     : 66500000Hz

ipg per clock : 665000000Hz

uart clock    : 66500000Hz

cspi clock    : 54000000Hz

Board: Efika MX Smartbook [POR]

PMIC ID: 0x000045d0 [Rev: 2.0a]

DRAM:  512 MB

JEDEC ID: 0xbf:0x25:0x4a

Reading SPI NOR flash 0x40000 [0x1000 bytes] -> ram 0xafd006e8

SUCCESS

In:    serial

Out:   serial

Err:   serial

Boot Source: SPI NOR FLASH BOOT

Hit any key to stop autoboot:  0

JEDEC ID: 0xbf:0x25:0x4a

4096 KiB SST25VF032B - 4MB at 0:1 is now current device

Reading SPI NOR flash 0x100000 [0x50000 bytes] -> ram 0x97800000

.SUCCESS

## Starting application at 0x97800000 ...

                                         �

U-Boot 2012.04.01-g7862ffd-dirty (Aug 16 2012 - 16:53:57)

CPU:   Freescale i.MX51 rev3.0 at 800 MHz

Reset cause: POR

Board: Efika MX, rev1.3

DRAM:  512 MiB

WARNING: Caches not enabled

MMC:   FSL_SDHC: 0

SF: Detected SST25VF032B with page size 4 KiB, total 4 MiB

In:    serial

Out:   serial

Err:   serial

Net:   CPU Net Initialization Failed

No ethernet found.

Efika>

</pre>